描述
Commercial Kitchen Refrigeration Saladette Table Fridge
Features:
1.Ambience temperature: 32°C & 65% humidity
2.60 mm insulation thickness
3.35/40 Kg/M3 Ecology friendly insulation material
4.CFC free Cooling gas R134a
5.Interior body AISI 304 2B stainless steel
6.Exterior body AISI 304 180# stainless steel
7.Adjustable shelving design
8.Energy saving compressor, digital thermostat and high speed& low noise fan motor
9.Smart defrosting system
10.Automatic water evaporation system (hot gas)
11.Inside with rounded corners and sunken bottom
12.Automatic closing & thicken door
13.Removable and easy cleaning magnetic gasket
14.Stainless steel adjustable legs
Specification:
1.Model No.: ASCL1200
2.Size (L*W*H):1200*760*1090mm
3.Voltage:220v/50Hz
4.Power:340W
5.Type of cooling :Ventilated
6.Temperature:0~10℃
7.Refrigerant:R134a
8.Capacity:220L
9.Ambient Temp.:32℃
10.Auto defrost:Yes
11.Digital Controller:yes
12.Famous Brand Compressor:yes
Instruction:
This saladette table fridge has been produced be internally or externally in its aesthetics and componability in response to the specific exigencies of our clientele furthermore it has been mechanically and aesthetically checked in every aspect before dispatch. For the correct utilization of equipment: carefully read the instructions, observe all the recommendations contained therein, consign this manual which constitutes an internal part of the essence of the equipment to the end user who is requested to retain it for future consultation. By observing these recommendations, you willguarantee the extended trouble-free operation of the equipment.
Initial cleaning
Before use saladette table fridge,all parts of the cabinet should be cleaned.For the walls and all the internal parts use and antibacterial detergent.For the plastic parts use a moistened cloth.Dry with a soft clean cloth. Use little or no water. Do not use harsh or abrasive solvents or detergents.During cleaning do not approach bare-handed those parts which could cut(evaporator, condenser, etc) and always use protective gloves.
Electrical connection
Check that the supply conforms to the requirements listed on the factory label and that it is provided with a fail-safe protection or automatic circuit breaker with an efficient earth connection. Should there not be an electrical safety feature, have this introduced by a qualified person, by means of a omnipolar switch as indicated in the safety regulations with a minimum clearance of the contacts of 3 mm.Where the cabinet has to beinstalled at some distance from the electrical source, ensure that the connection conforms to the local regulations.saladette table fridge are provided with anappropriate plug fitted with a neutral and earth: the supply cable must be well stretched(avoid coiling and superimposition). It must not be exposed to the possibility of damage by third parties. It should not be in contact with liquids, water or heat sources, in the event of damage, it must be replaced by qualified personnel.Always avoid the use of reducers or adapters.
Product Video:
Follow us on Facebook ![](https://acooker.com/wp-content/uploads/2019/12/u20086721582920939156fm26gp0-300x100.jpg)
Product Category
| >Cooking Equipment | >Refrigeration Equipment | >Bakery Equipment | >Food Processing Equipment | >S.S. Furniture
| >Food Display Equipment | >Snack equipment | > | >Furniture | >Small Wares