Salad Fridge | Commercial Salad Worktable

描述

Salad Fridge | Commercial Salad Worktable | Salad Chiller Table

Features:

1.High density insulation for cooling system
2.Static or ventilated system are available
3.s/s AISI 304 as our standard.
4.GN1/1 shelf size for operation
5.Europe brand controller
6.Cutting board with PP
7.Round corner hygiene
8.Inner bottom use bend line to drain pipe
9.Castor is available
10.Solid door can interchange by drawer.
11.Ventilated hole to help fresh air smoothly.
12.Embraco compressor
13.Ebm fan
14.Top quality cooper pipe built-in
15.Glass door is available·
16.Light led is avalilable

Specification:

1.Model No.: S902STD
2.Size (W*D*H mm)：1045*700*850mm
3.Voltage:220v/50Hz
4.Power:266W
5.Temperature：+2 ~+8℃
6.Refrigerant:R134a
7.Capacity:250L
8.N/W:69kg
9.Shelf:2
10.Auto defrost:Yes
11.Self-closing Door:yes
12.Digital Controller:yes
13.Famous Brand Compressor:yes

Instruction:

This Commercial Salad Fridge has been produced be internally or externally in its aesthetics and componability in response to the specific exigencies of our clientele furthermore it has been mechanically and aesthetically checked in every aspect before dispatch. For the correct utilization of equipment: carefully read the instructions, observe all the recommendations contained therein, consign this manual which constitutes an internal part of the essence of the equipment to the end user who is requested to retain it for future consultation. By observing these recommendations, you willguarantee the extended trouble-free operation of the equipment.

Initial cleaning:

Before use Salad Fridge,all parts of the cabinet should be cleaned.For the walls and all the internal parts use and antibacterial detergent.For the plastic parts use a moistened cloth.Dry with a soft clean cloth. Use little or no water. Do not use harsh or abrasive solvents or detergents.During cleaning do not approach bare-handed those parts which could cut(evaporator, condenser, etc) and always use protective gloves.Salad Fridge | Commercial Salad Worktable | Salad Chiller Table

Electrical connection:

Check that the supply conforms to the requirements listed on the factory label and that it is provided with a fail-safe protection or automatic circuit breaker with an efficient earth connection. Should there not be an electrical safety feature, have this introduced by a qualified person, by means of a omnipolar switch as indicated in the safety regulations with a minimum clearance of the contacts of 3 mm.Where the cabinet has to beinstalled at some distance from the electrical source, ensure that the connection conforms to the local regulations.Commercial Salad Fridge are provided with anappropriate plug fitted with a neutral and earth: the supply cable must be well stretched(avoid coiling and superimposition). It must not be exposed to the possibility of damage by third parties. It should not be in contact with liquids, water or heat sources, in the event of damage, it must be replaced by qualified personnel.Always avoid the use of reducers or adapters.