Fast food gas fryer restaurant frying equipment high-end 700 series

描述

Fast food gas fryer restaurant frying equipment high-end 700 series

Features:

1.All stainless steel body structure.
2.Adjustable stainless steel foot for stable placement.
3.The heating speed is fast and the volume of the oil basin is large
4.Fire tube heating has high heat transfer efficiency and can prevent sticking to the bottom and excessive furnace temperature.
5.Automatic temperature control, using cluster thermocouple, no power supply.
6.Overtemperature protection to ensure safety 230 ° C.
7.The oil drain valve is equipped with self-locking device to prevent misoperation.

Specification:

1.Size:W800*D708*H(850+100)mm
2.Power: 15.5kwx2
3.Capacity:20.3L x2
4.Temperature range:60 ～ 190℃
5.Power source:LPG,NG
6.Gas Pressure:2800-3700pa(LPG),2000-2500pa(NG)
7.Number of cylinders:2
8.Quality class:High-end
9.Product series:700 series
10.Product style:Free standing
11.Flame failure safety device:Yes

Installation requirements

1.All installation and operation must be conducted by qualified persons in accordance with the relevant provisions.Fast food gas fryer restaurant frying equipment high-end 700 series
2.When installation: the machines must be away from the wall to 10 cm, one thousand machines need to rely on a wall installation, which must be fireproof wall, can’t burn.
3.Installation position because it is in a well-ventilated place, and to install the exhaust fan, to ensure that in the process of operation, the steam and after combustion exhaust gas discharge.
4.Installed in the machine, must remain stable, horizontal, can not tilt, also could not shake when used.
5.When installation due to apply for permission to use this kind of gas suppliers, verify the supplied gas is consistent with the future use of gas, can be installed.

Matters need attention

1.No flammable objects (such as towel, etc.) on the furnace face any position, otherwise may cause burning fire accident.
2.After use, should be immediately shut off the gas valve.
3.Air leakage is found, should be immediately shut off the gas valve, open the window to strengthen ventilated, do not switch power supply to repair well before using.

The connection of the gas

1.Install the machine must be installed a quick to cut off the air valve, and must be on the machine near easily touch the upper position.
2.Ensure the machine connected with the gas type is the same, if not the same, please don’t get through, gas piping for being painted yellow.
3.Pipe connected to the machine must be connected with suitable metal tube.Fast food gas fryer restaurant frying equipment high-end 700 series
4.If the pipe pressure above or below the machine required pressure rated 10%, the need to install a regulator to ensure the rated pressure.
5.After connection, with soap and water or use testing instrument testing pipe joint leakage, “don’t use flame test!！