Catering grill with electric oven gas grill desktop high-end 700 serie

描述

Catering grill with electric oven gas grill desktop high-end 700 series

Features:

1.High power output, quick heating and high efficiency.
2.All Stainless steel body, nice-looking and easy to clean
3.The cast iron grid can keep thermal inertia.
4.It is equipped with adjustable feet.
5.With electric oven

Specification:

1.Size:W800*D708*H(850+100)mm
2.Grill Power: 14.4kw
3.Oven Power:4.8kw,380V/50Hz,3 phase
4.Grill area:725X492mm
5.Oven Temperature:50~300℃
6.Oven Chamber Size:560x505x270mm
7.Power source:LPG,NG+Electricity
8.Gas Pressure:2800-3700pa(LPG),2000-2500pa(NG)
9.Number of burner:2
10.Quality class:High-end
11.Product series:700 series
12.Product style:Desktop
13.Flame failure safety device:Yes
14.With electric oven:Yes
15.Oven:removable

Restaurant gas grill equipment floor standing high-end 900 series1

Installation requirements

1.All installation and operation must be conducted by qualified persons in accordance with the relevant provisions.Catering grill with electric oven gas grill desktop high-end 700 series
2.When installation: the machines must be away from the wall to 10 cm, one thousand machines need to rely on a wall installation, which must be fireproof wall, can’t burn.
3.Installation position because it is in a well-ventilated place, and to install the exhaust fan, to ensure that in the process of operation, the steam and after combustion exhaust gas discharge.
4.Installed in the machine, must remain stable, horizontal, can not tilt, also could not shake when used.
5.When installation due to apply for permission to use this kind of gas suppliers, verify the supplied gas is consistent with the future use of gas, can be installed.

Matters need attention

1.No flammable objects (such as towel, etc.) on the furnace face any position, otherwise may cause burning fire accident.
2.After use, should be immediately shut off the gas valve.
3.Air leakage is found, should be immediately shut off the gas valve, open the window to strengthen ventilated, do not switch power supply to repair well before using.

The connection of the gas

1.Install the machine must be installed a quick to cut off the air valve, and must be on the machine near easily touch the upper position.
2.Ensure the machine connected with the gas type is the same, if not the same, please don’t get through, gas piping for being painted yellow.
3.Pipe connected to the machine must be connected with suitable metal tube.Catering grill with electric oven gas grill desktop high-end 700 series
4.If the pipe pressure above or below the machine required pressure rated 10%, the need to install a regulator to ensure the rated pressure.
5.After connection, with soap and water or use testing instrument testing pipe joint leakage, “don’t use flame test!！